Jump to content

ULTRA MK2 Laser Show

From LaserOS Wiki
Revision as of 09:38, 20 May 2025 by Jake (talk | contribs) (Created page with "== Mk2 Laser Show Control Mode == link= link= link= link= link= link= Selecting the Play icon will begin the show. Show audio will be played from the 3.5mm stereo audio output socket. If Cube Link is enabled – see the Cube Link e...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Mk2 Laser Show Control Mode

Selecting the Play icon will begin the show. Show audio will be played from the 3.5mm stereo audio output socket.

If Cube Link is enabled – see the Cube Link entry here:

https://wiki.laseros.com/index.php/ULTRA_MK2_Audio_Settings

Selecting Play on a Cube Link Master will begin playback on the Master, plus any

Cube Link Slave devices configured with the same Link Channel and PIN.

For laser shows designed for more than one projector, ensure the Group number is set on each Cube Link device. Cube Link connected Slave devices have the status area background changed to purple.



https://github.com/Wickedlasers/mk2SDContent

Multi-projector Laser Shows

Using Cube-Link, the playback of multi-projector laser shows can be synchronized.


Example: Alive (2CH) Laser Show

Choose one Mk2 Laser cube to be the Master. This will be the one which commands

playback to start on all the slaves. Set the Link Channel and PIN to be the same on all Cube Link connected devices. Select Group corresponding to the parts of the Laser Show, so for Alive (2CH) all Group 1 devices will project one part, all Group 2 devices the other.

Master

Slave

For a 2 channel show using 4 projectors, set 2 projectors to Group 1 and 2 projectors to Group 2. Only have one configured as a master though.

Selecting Alive (2CH) on the master will now start projection on all devices.