UltraMk2FM

1) Connect the e-stop pendant to the LaserCube. 2) On the laser, turn key to the "ON" position. 3) On the e-stop pendant, if the red STOP switch is pushed in, rotate clockwise until it can be raised. 4) On the e-stop pendant, turn the key clockwise to the “ON” position. 5) With the red STOP switch raised plus keys on both the laser and pendant set to the “ON” position the Interlock / Emission LEDs will flash slowly, once every 3 seconds. 6) After the second flash, the laser may be enabled by briefly pressing the green START button. The Interlock / Emission LEDs will begin flashing more quickly, once every second. After 10 seconds the LEDS will remain solidly on and the laser will be capable of emission.